One Photonic Wafer Probe Station and one Photonic Assembly Station

Danmarks Tekniske Universitet - DTU

This tender concerns DTU Nano's planned procurement of a Photonic Assembly Station and a Photonic Wafer Probe Station. The tender is split into to two lots – one for each of the two stations. Tenderers may choose to bid on one or both lots, which will be evaluated and awarded individually. The assembly station is for connecting fibre array units (FAUs) to an optical chip. The type of connection will be edge coupling using waveguides loops for alignment but if necessary, the alignment can also be performed either using the light source on the chip (if it exists) or by using an external light source and connecting two FAUs, one on each side of the chip. Thus, the main purpose of the machine is to do assembly and fiber attachment of photonic chips. The system shall support research, prototyping, process development, pilot manufacturing, and low-volume production activities within DTU Nano's advanced fabrication facility. DTU has activities within Silicon Photonics (SiPh), Photonic Integrated Circuits (PICs), Optical transceivers, Laser modules, Photodetectors, Fiber-optic assemblies, Co-packaged optics and Quantum photonic devices which we want to support in the best possible way. DTU therefore intends to purchase a reconfigurable, flexible, versatile machine. The purpose of the photonic wafer probe station is to characterise the quality of photonic integrated circuits (PICs). It should be possible to characterise both optical and electrical performance. For the optical characterisation, the main coupling in/out technique will be through grating couplers, but the equipment should be possible to be configured also for edge coupling to component facets in a grove on the wafer. In this case, different holders and fibres may be needed. The electrical characteristics are to be characterised both in DC as well as RF up to 40GHz using probe and/or probe cards. The system shall support research, development, process qualification, and routine characterization activities within DTU Nano's advanced fabrication facility.

Deadline

Deadline 2026-11-02

Hvem?

• Danmarks Tekniske Universitet - DTU

Hvad?

Hvor?

• Hovedstaden › Byen København
• Hovedstaden › Københavns omegn
• Midtjylland › Østjylland
• Oslo og Viken › Oslo

Indkøbshistorik

Dato	Dokument
2026-10-01	Udbudsbekendtgørelse

Udbudsbekendtgørelse (2026-10-01)
Objekt
Omfanget af udbuddet
Titel: One Photonic Wafer Probe Station and one Photonic Assembly Station
Referencenummer: 11235
Kort beskrivelse:

This tender concerns DTU Nano's planned procurement of a Photonic Assembly Station and a Photonic Wafer Probe Station. The tender is split into to two lots – one for each of the two stations. Tenderers may choose to bid on one or both lots, which will be evaluated and awarded individually. The assembly station is for connecting fibre array units (FAUs) to an optical chip. The type of connection will be edge coupling using waveguides loops for alignment but if necessary, the alignment can also be performed either using the light source on the chip (if it exists) or by using an external light source and connecting two FAUs, one on each side of the chip. Thus, the main purpose of the machine is to do assembly and fiber attachment of photonic chips. The system shall support research, prototyping, process development, pilot manufacturing, and low-volume production activities within DTU Nano's advanced fabrication facility.  DTU has activities within Silicon Photonics (SiPh), Photonic Integrated Circuits (PICs), Optical transceivers, Laser modules, Photodetectors, Fiber-optic assemblies, Co-packaged optics and Quantum photonic devices which we want to support in the best possible way. DTU therefore intends to purchase a reconfigurable, flexible, versatile machine. The purpose of the photonic wafer probe station is to characterise the quality of photonic integrated circuits (PICs). It should be possible to characterise both optical and electrical performance. For the optical characterisation, the main coupling in/out technique will be through grating couplers, but the equipment should be possible to be configured also for edge coupling to component facets in a grove on the wafer. In this case, different holders and fibres may be needed. The electrical characteristics are to be characterised both in DC as well as RF up to 40GHz using probe and/or probe cards. The system shall support research, development, process qualification, and routine characterization activities within DTU Nano's advanced fabrication facility.

Kort beskrivelse

This tender concerns DTU Nano's planned procurement of a Photonic Assembly Station and a Photonic Wafer Probe Station. The tender is split into to two lots – one for each of the two stations. Tenderers may choose to bid on one or both lots, which will be evaluated and awarded individually.

The assembly station is for connecting fibre array units (FAUs) to an optical chip. The type of connection will be edge coupling using waveguides loops for alignment but if necessary, the alignment can also be performed either using the light source on the chip (if it exists) or by using an external light source and connecting two FAUs, one on each side of the chip.

Thus, the main purpose of the machine is to do assembly and fiber attachment of photonic chips. The system shall support research, prototyping, process development, pilot manufacturing, and low-volume production activities within DTU Nano's advanced fabrication facility. 

DTU has activities within Silicon Photonics (SiPh), Photonic Integrated Circuits (PICs), Optical transceivers, Laser modules, Photodetectors, Fiber-optic assemblies, Co-packaged optics and Quantum photonic devices which we want to support in the best possible way. DTU therefore intends to purchase a reconfigurable, flexible, versatile machine.

The purpose of the photonic wafer probe station is to characterise the quality of photonic integrated circuits (PICs). It should be possible to characterise both optical and electrical performance. For the optical characterisation, the main coupling in/out technique will be through grating couplers, but the equipment should be possible to be configured also for edge coupling to component facets in a grove on the wafer. In this case, different holders and fibres may be needed. The electrical characteristics are to be characterised both in DC as well as RF up to 40GHz using probe and/or probe cards.

The system shall support research, development, process qualification, and routine characterization activities within DTU Nano's advanced fabrication facility.

Kontrakttype: Varer
Produkter/tjenester: Maskiner og apparatur til prøvning og måling 📦
Anslået værdi uden moms: 1 250 000 EUR 💰
Supplerende kontrakttype: Tjenesteydelser
Oplysninger om partier
Denne kontrakt er opdelt i partier ✅
Maksimalt antal partier, der kan tildeles én tilbudsgiver: 2
Der kan indgives bud for et maksimalt antal partier: 2

1️⃣
Intern ID: 1-0
Titel: One Photonic Wafer Probe Station (Lot 1)
Mængde: 1 styk
Anslået værdi uden moms: 800 000 EUR 💰
Dette udbud er også egnet for små og mellemstore virksomheder (SMV'er) ✅
Beskrivelse af udbuddet:

The tender concerns a photonic wafer probe station to characterise the quality of photonic integrated circuits (PICs). It should be possible to characterise both optical and electrical performance. For the optical characterisation, the main coupling in/out technique will be through grating couplers but the equipment should be possible to be configured also for edge coupling. In this case, different holders and fibers may be needed. The electrical characterstics are to be characterised both in DC as well as RF up to 40GHz using probe and/or probe cards.

Yderligere produkter/tjenester:

Apparatur til kontrol og prøvning 📦

Diverse specialmaskiner 📦

Optiske specialinstrumenter 📦

Hovedsted eller sted for udførelsen: Delivery and installation at DTU Campus, Lyngby, Denmark.
Postnummer: 2800
By: Kongens Lyngby
Land: Danmark 🇩🇰
Sted for udførelsen: Københavns omegn 🏙️
Varighed: 1 år
Varighed
Startdato: 2026-12-05 📅
Oplysninger om valgmuligheder
Indstillinger ✅
Beskrivelse af mulighederne:

1) If temperature-controlled cooling water is required, the offer shall include a compatible chiller as an option. 2) Warranty period extension. 3) Period for service and technical support extension 4) Recommended start-up spare parts package 5) Moving and re-installment of the equipment within 12 months after delivery.

Kriterier for tildeling
Pris ✅
Pris (justeringskoefficient): 30
Kvalitetskriterium (navn): Machine (incl. physical requirements)
Kvalitetskriterium (vægtning): 15
Kvalitetskriterium (navn): Process
Kvalitetskriterium (vægtning): 40
Kvalitetskriterium (navn): Installation, service and guarantee
Titel
Partiets identifikationsnummer: LOT-0001

2️⃣
Intern ID: 2-1
Titel: One Photonic Assembly Station (Lot 2)
Anslået værdi uden moms: 450 000 EUR 💰
Beskrivelse af udbuddet:

The tender is for buying an optical assembly station for connecting fiber array units (FAUs) to an optical chip. The type of connection will be edge coupling using waveguides loops for alignment but if, necessary, the alignment can also be performed either using the light source on the chip (if it exists) or by using an external light source and connecting two FAUs, one on each side of the chip.

Varighed
Startdato: 2026-12-07 📅
Oplysninger om valgmuligheder
Beskrivelse af mulighederne:

1) If temperature-controlled cooling water is required, the offer shall include a compatible chiller as an option. 2) Solutions that provide the possibility to perform plasma cleaning in-place 3) Warranty period extension 4) Period for service and technical support extension 5) Recommended start-up spare parts package 6) Moving and re-installment of the equipment within 12 months after delivery

Titel
Partiets identifikationsnummer: LOT-0002
Beskrivelse
Hovedsted eller sted for udførelsen: The equipment must be delivered and installed at DTU Campus in Lyngby Denmark.

Procedure
Type af procedure
Åben procedure ✅
Retsgrundlag: Direktiv 2014/24/EU
Hovedpunkterne i proceduren:

Tenderers may only participate in this tender if they are not encompassed by any of the grounds for exclusion and if they comply with DTU’s minimum requirements for suitability. Any tenderer that meets these conditions for participation may submit a tender.

Retsgrundlag:

This tender is conducted as an Open Procedure according to §§ 56-57 in the Danish legislative act (no. 1564 of December 15th 2015 (Udbudsloven)) with later changes.

Administrative oplysninger
Frist for modtagelse af bud eller ansøgninger om deltagelse: 2026-11-02 22:59:00 📅
Sprog, på hvilke bud eller ansøgninger om deltagelse kan indgives: engelsk 🗣️
Minimumsfrist, inden for hvilken tilbudsgiveren skal opretholde tilbuddet: 3 måneder
Udbudsbetingelser
Tilbudsgivere kan indgive mere end ét tilbud
Avanceret eller kvalificeret elektronisk signatur eller segl (jf forordning (EU) nr 910/2014) er påkrævet
Elektronisk fakturering: Påkrævet
Der vil blive anvendt elektronisk bestilling ✅
Der vil blive anvendt elektronisk betaling ✅
Kriterier for tildeling
Vægtningstype: Vægtning (procentdel, præcis)
Udbudsbetingelser
Kontrakten indeholder gennemførelsesbetingelser ✅

Juridiske, økonomiske, finansielle og tekniske oplysninger
Betingelser for deltagelse
Udvælgelseskriterium: Generel årlig omsætning
Liste og kortfattet beskrivelse af regler og kriterier:

For the last 3 audited financial years, as a minimum the Tenderer must for each year have had a net turnover of DKK 10,000,000.

Udvælgelseskriterium: Finansielt forhold
Liste og kortfattet beskrivelse af regler og kriterier:

For the last 3 audited financial years, as a minimum the Tenderer must for each year have had a positive equity.

Udvælgelseskriterium: Referencer på specificerede leverancer
Liste og kortfattet beskrivelse af regler og kriterier:

As a minimum the Tenderer must provide 2 references for comparable agreements. Comparable agreements mean agreements with a value of at least DKK 3,000,000 concerning delivery of Photonic Wafer Probe Stations or photonic equipment comparable to this, in the sense of functionality and complexity. The agreement, to which the reference refers, must not be more than 3 years old. The date is calculated from the date of approved delivery, installation and testing of the equipment. If the Tenderer cannot comply with the requirement, the Tenderer may rely on the capacities of other entities or make a consortium

Betingelser i forbindelse med kontrakten
Betingelser for opfyldelse af kontrakten: Reference is made to the contract draft in the tender material.
Betingelser for deltagelse
Udelukkelsesgrund:

Afgivelse af urigtige oplysninger, tilbageholdelse af oplysninger, ude af stand til at fremlægge de dokumenter, der anmodes om, eller indhentede fortrolige oplysninger i forbindelse med denne procedure

Aktiver, der administreres af en kurator

Alvorlige forsømmelser i forbindelse med udøvelsen af erhvervet

+ 18 mere

Børnearbejde og andre former for menneskehandel

Deltagelse i en kriminel organisation

Direkte eller indirekte involvering i forberedelsen af denne udbudsprocedure

En situation, der svarer til konkurs i henhold til national ret

Erhvervsvirksomheden er indstillet

Hvidvaskning af penge eller finansiering af terrorisme

Insolvens

Interessekonflikt som følge af deltagelse i udbudsproceduren

Konkurs

Korruption

Svig

Terrorhandlinger eller strafbare handlinger med forbindelse til terroraktivitet

Tilsidesættelse af forpligtelser på det arbejdsretlige område

Tilsidesættelse af forpligtelser på miljølovgivningsområdet

Tilsidesættelse af forpligtelser på sociallovgivningsområdet

Tilsidesættelse af forpligtelser vedrørende betaling af bidrag til sociale sikringsordninger

Tilsidesættelse af forpligtelser vedrørende betaling af skatter og afgifter

Tvangsakkord uden for konkurs

Beskrivelse af udelukkelsesgrunde:

Has the economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein been the subject of a conviction by final judgment for…

… corruption, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? As defined in Article 3 of the Convention on the fight against corruption involving officials of the European Communities or officials of Member States of the European Union, OJ C 195, 25.6.1997, p. 1, and in Article 2(1) of Council Framework Decision 2003/568/JHA of 22 July 2003 on combating corruption in the private sector (OJ L 192, 31.7.2003, p. 54). This exclusion ground also includes corruption as defined in the national law of the contracting authority (contracting entity) or the economic operator

… fraud, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? Within the meaning of Article 1 of the Convention on the protection of the European Communities' financial interests (OJ C 316, 27.11.1995, p. 48).

… money laundering or terrorist financing, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? As defined in Article 1 of Directive 2005/60/EC of the European Parliament and of the Council of 26 October 2005 on the prevention of the use of the financial system for the purpose of money laundering and terrorist financing (OJ L 309, 25.11.2005, p. 15).

… participation in a criminal organisation, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? As defined in Article 2 of Council Framework Decision 2008/841/JHA of 24 October 2008 on the fight against organised crime (OJ L 300, 11.11.2008, p. 42).

… terrorist offences or offences linked to terrorist activities, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? As defined in Articles 1 and 3 of Council Framework Decision of 13 June 2002 on combating terrorism (OJ L 164, 22.6.2002, p. 3). This exclusion ground also includes inciting or aiding or abetting or attempting to commit an offence, as referred to in Article 4 of that Framework Decision.

… child labour and other forms of trafficking in human beings, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable? As defined in Article 2 of Directive 2011/36/EU of the European Parliament and of the Council of 5 April 2011 on preventing and combating trafficking in human beings and protecting its victims, and replacing Council Framework Decision 2002/629/JHA (OJ L 101, 15.4.2011, p. 1).

Has the economic operator, to its knowledge, breached its obligations in the field of…

… environmental law? As referred to for the purposes of this procurement in national law, in the relevant notice or the procurement documents or in Article 18(2) of Directive 2014/24/EU.

… labour law? As referred to for the purposes of this procurement in national law, in the relevant notice or the procurement documents or in Article 18(2) of Directive 2014/24/EU.

… social law? As referred to for the purposes of this procurement in national law, in the relevant notice or the procurement documents or in Article 18(2) of Directive 2014/24/EU.

Is the economic operator guilty of grave professional misconduct? Where applicable, see definitions in national law, the relevant notice or the procurement documents.

Can the economic operator confirm that:a) It has been guilty of serious misrepresentation in supplying the information required for the verification of the absence of grounds for exclusion or the fulfilment of the selection criteria,b) It has withheld such information,c) It has not been able, without delay, to submit the supporting documents required by a contracting authority or contracting entity, andd) It has undertaken to unduly influence the decision making process of the contracting authority or contracting entity, to obtain confidential information that may confer upon it undue advantages in the procurement procedure or to negligently provide misleading information that may have a material influence on decisions concerning exclusion, selection or award?

Is the economic operator aware of any conflict of interest, as indicated in national law, the relevant notice or the procurement documents due to its participation in the procurement procedure?

Has the economic operator or an undertaking related to it advised the contracting authority or contracting entity or otherwise been involved in the preparation of the procurement procedure?

Has the economic operator breached its obligations relating to the payment…

… social security contributions, both in the country in which it is established and in Member State of the contracting authority or contracting entity if other than the country of establishment?

… of taxes, both in the country in which it is established and in Member State of the contracting authority or contracting entity if other than the country of establishment?

Are the business activities of the economic operator suspended? This information needs not be given if exclusion of economic operators in this case has been made mandatory under the applicable national law without any possibility of derogation where the economic operator is nevertheless able to perform the contract.

Is the economic operator bankrupt? This information needs not be given if exclusion of economic operators in this case has been made mandatory under the applicable national law without any possibility of derogation where the economic operator is nevertheless able to perform the contract.

Is the economic operator in arrangement with creditors? This information needs not be given if exclusion of economic operators in this case has been made mandatory under the applicable national law without any possibility of derogation where the economic operator is nevertheless able to perform the contract.

Is the economic operator the subject of insolvency or winding-up? This information needs not be given if exclusion of economic operators in this case has been made mandatory under the applicable national law without any possibility of derogation where the economic operator is nevertheless able to perform the contract.

Are the assets of the economic operator being administered by a liquidator or by the court? This information needs not be given if exclusion of economic operators in this case has been made mandatory under the applicable national law without any possibility of derogation where the economic operator is nevertheless able to perform the contract.

Is the economic operator in in any analogous situation like bankruptcy arising from a similar procedure under national laws and regulations? This information needs not be given if exclusion of economic operators in this case has been made mandatory under the applicable national law without any possibility of derogation where the economic operator is nevertheless able to perform the contract.

Ordregivende myndighed
Navn og adresser
Navn: Danmarks Tekniske Universitet - DTU
Nationalt registreringsnummer: 30060946
Postadresse: Anker Engelunds Vej 1
Postnummer: 2800
Postby: Kgs. Lyngby
Region: Københavns omegn 🏙️
Land: Danmark 🇩🇰
Enhed: Laura Aagaard
E-mail: lplaa@dtu.dk 📧
Telefon: +45 99999999 📞
URL: https://www.dtu.dk 🌏
Køberprofilens adresse: https://eu.eu-supply.com/ctm/company/companyinformation/index/165863 🌏
Den ordregivende myndigheds type
Offentligretligt organ
Hovedaktivitet
Uddannelse
Kommunikation
URL til dokumenter: https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=461519&TID=200421875&B= 🌏
URL for deltagelse: https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=461519&TID=200421875&B= 🌏
Elektronisk indgivelse: Påkrævet

Supplerende oplysninger
Yderligere oplysninger

General information about participation in the tender procedure: Participation in this tender can only take place electronically via the contracting authority's electronic procurement system. In order to gain access to the tender documents, the tenderer must be registered or register as a user. If the tender contains several versions of the same document, the most recent uploaded version will be the valid one. All communication in connection with the procurement procedure, including questions and answers, must be made via the electronic procurement system. Questions must be asked so that they are received in time for the contracting authority to obtain the necessary information and provide the answers no later than six days before the application deadline. Questions received later than six days before the deadline cannot be expected to be answered unless the deadline is postponed at the same time. Interested parties are asked to stay informed via the electronic procurement system. If the tenderer experiences problems with the system, support can be contacted by email, dksupport@eu-supply.com, or phone, (+45) 70 20 80 14. As part of its tender, the tenderer must submit an ESPD. It is not necessary for the tenderer to sign its ESPD document. In the case of an association of undertakings (e.g. a consortium), a separate ESPD must be submitted for each of the participating economic operators. However, if the tenderer is an association of undertakings, the ESPD document of each participant must be signed by the participant in question. It is not necessary for the lead bidder submitting the tender to sign its ESPD document. If the tenderer relies on the capabilities of other entities, an ESPD must be submitted for each of the entities on which it is based, and the ESPD document must be signed by the supporting entity. Prior to the award decision, the Tenderer to whom the contracting entity intends to award the contract must submit documentation of the information provided in the ESPD in accordance with sections 151-152 of the Public Procurement Act, cf. section 153. As an alternative to the documentation mentioned in sections 153-155, 157 and 158 of the Public Procurement Act, the tenderer may submit to the contracting authority a certificate of inclusion on an official list of approved economic operators, cf. section 156, issued by the competent authority. The contracting entity may only accept certificates of inclusion on an official list from tenderers established in the country that maintains the official list. If the Tenderer relies on the capacity of other entities, the Tenderer must also submit a statement of support in which the entity(s) on which the Tenderer relies declares that it is jointly and severally liable with the Tenderer if the latter is awarded the contract. The template is included as an appendix to the tender specifications. If the Tenderer constitutes an association of companies (e.g. a consortium), the Tenderer must also submit a consortium declaration in which all consortium participants declare that they are jointly and severally liable with each other if the consortium is awarded the agreement. The template appears as an appendix to the tender specifications. Estimated value of the agreement: It should be noted that the amount is an estimate of the expected contract price for the agreement. Attention is drawn to the fact that the tender is covered by Article 5k of Regulation (EU) No 833/2014 as amended. The provision contains a prohibition on awarding contracts to Russian companies and Russian-controlled companies, etc. (see Article 5k(1) for the precise delimitation of the players covered by the prohibition). The contracting authority reserves the right at any stage of the tender process to require documentation that the economic operators are not covered by the prohibition, e.g. by requiring a declaration to this effect and/or documentation of the operators' and their subcontractors' place of establishment and ownership, if any. As stated, the tender is split into two lots. Tenderers may submit bids on one or both of these lots. Evaluation and awarding will be done in separate for each lot.

Yderligere oplysninger

General information about participation in the tender procedure:
Participation in this tender can only take place electronically via the contracting authority's electronic procurement system. In order to gain access to the tender documents, the tenderer must be registered or register as a user. If the tender contains several versions of the same document, the most recent uploaded version will be the valid one. All communication in connection with the procurement procedure, including questions and answers, must be made via the electronic procurement system. Questions must be asked so that they are received in time for the contracting authority to obtain the necessary information and provide the answers no later than six days before the application deadline. Questions received later than six days before the deadline cannot be expected to be answered unless the deadline is postponed at the same time. Interested parties are asked to stay informed via the electronic procurement system. If the tenderer experiences problems with the system, support can be contacted by email, dksupport@eu-supply.com, or phone, (+45) 70 20 80 14.
As part of its tender, the tenderer must submit an ESPD. It is not necessary for the tenderer to sign its ESPD document. In the case of an association of undertakings (e.g. a consortium), a separate ESPD must be submitted for each of the participating economic operators. However, if the tenderer is an association of undertakings, the ESPD document of each participant must be signed by the participant in question. It is not necessary for the lead bidder submitting the tender to sign its ESPD document. If the tenderer relies on the capabilities of other entities, an ESPD must be submitted for each of the entities on which it is based, and the ESPD document must be signed by the supporting entity.
Prior to the award decision, the Tenderer to whom the contracting entity intends to award the contract must submit documentation of the information provided in the ESPD in accordance with sections 151-152 of the Public Procurement Act, cf. section 153. As an alternative to the documentation mentioned in sections 153-155, 157 and 158 of the Public Procurement Act, the tenderer may submit to the contracting authority a certificate of inclusion on an official list of approved economic operators, cf. section 156, issued by the competent authority. The contracting entity may only accept certificates of inclusion on an official list from tenderers established in the country that maintains the official list. If the Tenderer relies on the capacity of other entities, the Tenderer must also submit a statement of support in which the entity(s) on which the Tenderer relies declares that it is jointly and severally liable with the Tenderer if the latter is awarded the contract. The template is included as an appendix to the tender specifications. If the Tenderer constitutes an association of companies (e.g. a consortium), the Tenderer must also submit a consortium declaration in which all consortium participants declare that they are jointly and severally liable with each other if the consortium is awarded the agreement. The template appears as an appendix to the tender specifications.
Estimated value of the agreement: It should be noted that the amount is an estimate of the expected contract price for the agreement.
Attention is drawn to the fact that the tender is covered by Article 5k of Regulation (EU) No 833/2014 as amended. The provision contains a prohibition on awarding contracts to Russian companies and Russian-controlled companies, etc. (see Article 5k(1) for the precise delimitation of the players covered by the prohibition). The contracting authority reserves the right at any stage of the tender process to require documentation that the economic operators are not covered by the prohibition, e.g. by requiring a declaration to this effect and/or documentation of the operators' and their subcontractors' place of establishment and ownership, if any.
As stated, the tender is split into two lots. Tenderers may submit bids on one or both of these lots. Evaluation and awarding will be done in separate for each lot.

Gennemgå organ
Navn: Klagenævnet for Udbud
Nationalt registreringsnummer: 37795526
Postadresse: Nævnenes hus, Toldboden 2
Postnummer: 8800
Postby: Viborg
Region: Østjylland 🏙️
Land: Danmark 🇩🇰
E-mail: klfu@erst.dk 📧
Telefon: +45 35291000 📞
URL: http://www.klfu.dk 🌏
Tjeneste, hvorfra der kan indhentes oplysninger om klageproceduren
Navn: Konkurrence- og Forbrugerstyrelsen
Nationalt registreringsnummer: 10294819
Postadresse: Carl Jacobsens Vej 35
Postnummer: 2500
Postby: Valby
Region: Byen København 🏙️
E-mail: kfst@kfst.dk 📧
Telefon: +45 41715000 📞
URL: http://www.kfst.dk 🌏
Gennemgangsprocedure
Præcise oplysninger om fristerne for gennemgangsprocedurer:

Complaint regarding the award of a contract must be submitted no later than 45 calendar days from the date after the Contracting Authority has published a notice in the European Union Official Journal informing that the Contracting Authority has awarded/concluded a contract, cf. lov om Klagenævnet for Udbud (Complaints Board for Tenders) § 7, Section 2, no. 1.

Oplysninger om elektroniske arbejdsgange
Elektronisk fakturering vil blive accepteret
Kilde: OJS 2026/S 192-681487 (2026-10-01)

Nye indkøb inden for beslægtede kategorier 🆕

Laboratorieudstyr, optisk udstyr og præcisionsudstyr (ikke briller) (10 nye indkøb)

Apparatur til kontrol og prøvning (3)

Maskiner og apparatur til prøvning og måling