DTU Structural Lab is a lab-unit under the Villum Center for Advanced Structural and Materials Testing (CASMaT), and underpinned by the two DTU Departments of Civil Engineering and Mechanical Engineering. The laboratory is one of the largest and most well equipped laboratories of its type in Northern Europe and includes a large inventory of test and measurement equipment for both material, component and structural testing, including a large array of servo-hydraulic test machines and actuators as well as both strong floors and walls and advanced measurement and monitoring systems. The laboratory is currently upgrading its capabilities within construction materials testing and in that connection three new test machines with capacities of 100, 500 and 3 000 kN are needed. The subject of the current tender is these three mechanical testing machines for construction material characterisation.
Deadline
Fristen for modtagelse af bud var på 2020-12-17.
Indkøbet blev offentliggjort på 2020-11-16.
Leverandører
Følgende leverandører er nævnt i tildelingsbeslutninger eller andre indkøbsdokumenter:
Objekt Omfanget af udbuddet
Titel: Mechanical Testing Machines for Construction Material Characterisation
Produkter/tjenester: Måleudstyr📦
Kort beskrivelse:
“DTU Structural Lab is a lab-unit under the Villum Center for Advanced Structural and Materials Testing (CASMaT), and underpinned by the two DTU Departments...”
Kort beskrivelse
DTU Structural Lab is a lab-unit under the Villum Center for Advanced Structural and Materials Testing (CASMaT), and underpinned by the two DTU Departments of Civil Engineering and Mechanical Engineering. The laboratory is one of the largest and most well equipped laboratories of its type in Northern Europe and includes a large inventory of test and measurement equipment for both material, component and structural testing, including a large array of servo-hydraulic test machines and actuators as well as both strong floors and walls and advanced measurement and monitoring systems. The laboratory is currently upgrading its capabilities within construction materials testing and in that connection three new test machines with capacities of 100, 500 and 3 000 kN are needed. The subject of the current tender is these three mechanical testing machines for construction material characterisation.
DTU Structural Lab is a lab-unit under the Villum Center for Advanced Structural and Materials Testing (CASMaT), and underpinned by the two DTU Departments of Civil Engineering and Mechanical Engineering. The laboratory is one of the largest and most well equipped laboratories of its type in Northern Europe and includes a large inventory of test and measurement equipment for both material, component and structural testing, including a large array of servo-hydraulic test machines and actuators as well as both strong floors and walls and advanced measurement and monitoring systems. The laboratory is currently upgrading its capabilities within construction materials testing and in that connection three new test machines with capacities of 100, 500 and 3 000 kN are needed. The subject of the current tender is these three mechanical testing machines for construction material characterisation.
Vis mere Kriterier for tildeling
Kvalitetskriterium (navn): Quality and functionality
Kvalitetskriterium (vægtning): 60 %
Pris (justeringskoefficient): 40 %
Kontraktens, rammeaftalens eller det dynamiske indkøbssystems varighed
Nedenstående tidsramme er udtrykt i antal måneder.
Beskrivelse
Varighed: 7
Oplysninger om begrænsningerne i antallet af ansøgere, der kan indbydes
Påtænkt antal ansøgere: 4
Objektive kriterier for udvælgelse af det begrænsede antal ansøgere:
“Selection of candidates will be based on an overall assessment of the references, which the candidates have provided in connection with fulfilment of...”
Objektive kriterier for udvælgelse af det begrænsede antal ansøgere
Selection of candidates will be based on an overall assessment of the references, which the candidates have provided in connection with fulfilment of minimum requirements for suitability. Candidates with the best and most relevant references in relation to the specific agreement, will be selected.
When assessing the relevance of the references, DTU will among other things give weight to the following parameters:
— references similar with the current procurement, including new machines and/or upgrade of machines;
— age of reference (the newer the reference, the better);
— previous agreements with universities comparable to DTU.
Vis mere Oplysninger om valgmuligheder
Indstillinger ✅
Beskrivelse af mulighederne:
“For all three machines, a number of options apply.
Please be referred to the tender material (requirements specification) for details of all options.” Beskrivelse
Yderligere oplysninger:
“In addition to the compulsory grounds for exclusion, cf. section 135-136 in the Danish Public Procurement Act, the voluntary grounds for exclusion in...”
Yderligere oplysninger
In addition to the compulsory grounds for exclusion, cf. section 135-136 in the Danish Public Procurement Act, the voluntary grounds for exclusion in section 137(1)(1, 2 and 6) apply for this tender procedure.
Juridiske, økonomiske, finansielle og tekniske oplysninger Økonomisk og finansiel stilling
Liste og kortfattet beskrivelse af udvælgelseskriterier:
“For the last three audited financial years, tenderers must present their net turnover and equity.” Betingelser for deltagelse
“For the last three audited financial years, as a minimum the tenderer must for each year have had:
1) a net turnover of DKK 2 000 000; and
2) an equity of...”
For the last three audited financial years, as a minimum the tenderer must for each year have had:
1) a net turnover of DKK 2 000 000; and
2) an equity of DKK 1 000 000.
Vis mere Teknisk og faglig kompetence
Liste og kortfattet beskrivelse af udvælgelseskriterier:
“Tenderer must provide references for comparable agreements. Comparable agreements mean agreements with a value of at least DKK 500 000 concerning mechanical...”
Liste og kortfattet beskrivelse af udvælgelseskriterier
Tenderer must provide references for comparable agreements. Comparable agreements mean agreements with a value of at least DKK 500 000 concerning mechanical testing machines for construction material characterisation or similar services. The agreement, to which the reference refers, must not be more than 3 years old. The date is calculated from the last signature on the agreement referred to.
The candidate/tenderer must give the following information for each reference:
— name of the contracting party;
— time of execution, including if the task has been completed;
— short description of the delivery and comparability to this procurement;
— contract value.
Vis mere Betingelser for deltagelse
Betingelser for deltagelse (tekniske og faglige kvalifikationer):
“As a minimum the tenderer must provide five references for comparable agreements.”
Procedure Type af procedure
Konkurrencepræget procedure med forhandling
Oplysninger om forhandling
Den ordregivende myndighed forbeholder sig ret til at tildele kontrakten på grundlag af de første tilbud uden at føre forhandlinger
Administrative oplysninger
Frist for modtagelse af bud eller ansøgninger om deltagelse: 2020-12-17
10:00 📅
Sprog, på hvilke bud eller ansøgninger om deltagelse kan indgives: engelsk 🗣️
Nedenstående tidsramme er udtrykt i antal måneder.
Minimumsfrist, inden for hvilken tilbudsgiveren skal opretholde tilbuddet: 6
Supplerende oplysninger Yderligere oplysninger
“In addition to the compulsory grounds for exclusion, cf. section 135-136 in the Danish Public Procurement Act, the voluntary grounds for exclusion in...”
In addition to the compulsory grounds for exclusion, cf. section 135-136 in the Danish Public Procurement Act, the voluntary grounds for exclusion in section 137(1)(1, 2 and 6) apply for this tender procedure.
Vis mere Gennemgå organ
Navn: Klagenævnet for Udbud
Postadresse: Nævnenes hus, Toldboden 2
Postby: Viborg
Postnummer: 8800
Land: Danmark 🇩🇰
Telefon: +45 35291000📞
E-mail: klfu@erst.dk📧
URL: http://www.klfu.dk🌏 Gennemgangsprocedure
Præcise oplysninger om fristerne for gennemgangsprocedurer:
“Complaint regarding pre-qualification:
Complaint regarding pre-qualification must be submitted no later than 20 calendar days after notification has been...”
Præcise oplysninger om fristerne for gennemgangsprocedurer
Complaint regarding pre-qualification:
Complaint regarding pre-qualification must be submitted no later than 20 calendar days after notification has been sent to the concerned candidates informing them who has been selected, if the notification includes the grounds for the decision, cf. lov om Klagenævnet for Udbud (Complaints Board for Tenders) § 7, Section 1.
Complaint regarding award of contract:
Complaint regarding the award of a contract must be submitted no later than 45 calendar days from the date after the contracting authority has published a notice in the European Union Official Journal informing that the contracting authority has awarded/concluded a contract, cf. lov om Klagenævnet for Udbud (Complaints Board for Tenders) § 7, Section 2, No 1.
Vis mere Tjeneste, hvorfra der kan indhentes oplysninger om klageproceduren
Navn: Konkurrence- og Forbrugerstyrelsen
Postadresse: Carl Jacobsens Vej 35
Postby: Valby
Postnummer: 2500
Land: Danmark 🇩🇰
Telefon: +45 41715000📞
E-mail: kfst@kfst.dk📧
URL: http://www.kfst.dk🌏
Kilde: OJS 2020/S 227-556443 (2020-11-16)
Bekendtgørelse om indgåede kontrakter (2021-06-03) Ordregivende myndighed Navn og adresser
Navn: Danmarks Tekniske Universitet — DTU
Postby: Kgs. Lyngby
Objekt Omfanget af udbuddet
Titel: Mechanical Testing Machines for Construction Material characterisation
Kort beskrivelse:
“DTU Structural Lab is a lab-unit under the Villum Center for Advanced Structural and Materials Testing (CASMaT), and underpinned by the two DTU departments...”
Kort beskrivelse
DTU Structural Lab is a lab-unit under the Villum Center for Advanced Structural and Materials Testing (CASMaT), and underpinned by the two DTU departments of Civil Engineering and Mechanical Engineering. The laboratory is one of the largest and most well equipped laboratories of its type in North-ern Europe and includes a large inventory of test and measurement equipment for both material, component and structural testing, including a large array of servo-hydraulic test machines and actuators as well as both strong floors and walls and advanced measurement and monitoring systems. The laboratory is currently upgrading its capabilities within construction materials testing and in that connection three new test machines with capacities of 100, 500 and 3000 kN are needed. The subject of the current tender is these three mechanical testing machines for construction material characterisation.
Vis mere
Samlet værdi af indkøbsaftalen (ekskl. moms): EUR 339 500 💰
Beskrivelse
Beskrivelse af udbuddet:
“DTU Structural Lab is a lab-unit under the Villum Center for Advanced Structural and Materials Testing (CASMaT), and underpinned by the two DTU departments...”
Beskrivelse af udbuddet
DTU Structural Lab is a lab-unit under the Villum Center for Advanced Structural and Materials Testing (CASMaT), and underpinned by the two DTU departments of Civil Engineering and Mechanical Engineering. The laboratory is one of the largest and most well equipped laboratories of its type in North-ern Europe and includes a large inventory of test and measurement equipment for both material, component and structural testing, including a large array of servo-hydraulic test machines and actuators as well as both strong floors and walls and advanced measurement and monitoring systems. The laboratory is currently upgrading its capabilities within construction materials testing and in that connection three new test machines with capacities of 100, 500 and 3000 kN are needed. The subject of the current tender is these three mechanical testing machines for construction material characterisation.
Procedure Administrative oplysninger
Tidligere offentliggørelse vedrørende denne procedure: 2020/S 227-556443
Tildeling af kontrakt
1️⃣
Kontraktnummer: 1
Titel: Mechanical Testing Machines for Construction Material characterisation
Dato for indgåelse af kontrakten: 2021-03-31 📅
Oplysninger om udbud
Antal modtagne bud: 1
Navn og adresse på kontrahenten
Navn: MTS Systems Norden AB
Postadresse: Datavägen 37B
Postby: Askim
Postnummer: 43632
Land: Sverige 🇸🇪
Region: Sverige 🏙️
Entreprenøren er en SMV ✅ Oplysninger om kontraktens/parcellens værdi (ekskl. moms)
Kontraktens/parcellens samlede værdi: EUR 339 500 💰
Supplerende oplysninger Gennemgangsprocedure
Præcise oplysninger om fristerne for gennemgangsprocedurer:
“Complaint regarding prequalification:
Complaint regarding prequalification must be submitted no later than 20 calendar days after notification has been sent...”
Præcise oplysninger om fristerne for gennemgangsprocedurer
Complaint regarding prequalification:
Complaint regarding prequalification must be submitted no later than 20 calendar days after notification has been sent to the concerned Candidates informing them who has been selected, if the notification includes the grounds for the decision, cf. lov om Klagenævnet for Udbud (Complaints Board for Tenders) § 7, Section 1.
Complaint regarding award of contract:
Complaint regarding the award of a contract must be submitted no later than 45 calendar days from the date after the Contracting Authority has published a notice in the European Union Official Journal informing that the Contracting Authority has awarded/concluded a contract, cf. lov om Klagenævnet for Udbud (Complaints Board for Tenders) § 7, Section 2, No 1.
Vis mere
Kilde: OJS 2021/S 109-286768 (2021-06-03)