RSC Cure NL Lot 2 — January 2016

DONG Energy Thermal Power A/S

Cure DONG Energy REnescience B.V. has decided to establish a plant for a complete handling of unsorted
household waste (Municipal Solid Waste — MSW).
DONG Energy Thermal Power A/S will be responsible for the execution of the project on behalf of Cure DONG
Energy REnescience B.V.
The project, RSC Cure NL will be based on DONG Energy's REnescience Technology, which is a technology
for treatment of unsorted household waste. The purpose of the process is sorting and refining the waste for
utilization in the production of bioliquid for biogas production, 2D material such as folios of e.g. plastics for the
making of RDF and 3D materials such as bottles and cans for the purpose of re-cycling.
The plant will be established in Eindhoven, Holland, and will be designed with a capacity of 120 000 ton of
household waste per year, or 15 t/h.
This pre-qualification is specific to the REnescience core process internal referred to as Lot 2, which consists
of following main processes:
2.1 Waste inlet handling;
2.2 The REnescience reactor part;
2.3 Separation and Bioliquid Treatment;
2.4 2D Treatment;
2.5 3D Treatment.
The Processes 2.1 to 2.5 described above are to be connected to one functional unit, securing a handling, treatment and
separation of MSW to levels specified in the coming call for tender material.
Regarding 2.1) Waste inlet handling.
The delivery will consist of all electromechanical equipment required for handling the incoming municipal
household waste, and thus preparing it for readily treatment within the reactor part. This process will
comprise equipment enabling exposure of organic bagged MSW — such as a bag opening device — and a
number of conveying systems, enabling transport of MSW to the REnescience reactor part (refer to 2.2. below).
Regarding 2.2) The REnescience reactor part
The delivery will consist of all electromechanical equipment required for an enzymatic treatment of the exposed
MSW. This process will comprise two or more parallel reactor lines, each consisting of a reactor infeed, a
reactor, and a treated waste buffer section enabling pH adjustment / water supply and pH regulation, enzymatic
treatment and solid de-watering, respectively.
The reactor part basic design details will be provided by DONG Energy as a proposal for the final design. The
infeed section, and the reactor lines are to be manufactured in stainless steel due to high load (waste mixed with
process water), abrasion, and corrosive environment (each reactor are horizontal installed circular vessels with a diameter of app.
5 meters, and a length of 50 meters, which during operational conditions are heated to app. 50-60 oC, rotating 1
rpm).
Regarding 2.3) Separation and Bioliquid Treatment.
The delivery will comprise all electromechanical equipment required for a proper separation of the semi-wet
waste into the three fractions; bioliquid, 2D and 3D materials. In addition, a separation of batteries and other
unwanted rejects from the bioliquid will be required. Subsequent to the separation steps, the bioliquid will still
contain unwanted materials — such as sand and glass particles (inert material). These inert solid materials will
need to be separated from the bioliquid by means of an appropriate inert separator, before leading the bio liquid
to the anaerobic digester (AD-plant — which is a part of a seperate tender — referred to as Lot 3). Equipment relevant to the inert
separation process is included in this tender as an option, however it will also be included as an option to the tender for the AD-plant,
while it must be an integrated part of either this LOT or as a part of the connected AD Plant.
Regarding 2.4) 2D Treatment.
The delivery will comprise all electromechanical equipment required for a proper cleaning of 2D materials — e.g. plastic,
textiles etc. The plastic fraction will need a specific level of cleanliness. The 2D textiles are to be
separated from the plastic fraction, and led to the anaerobic digester (AD-plant — which is a part of a separate tender — referred to as Lot 3).
The entire REnescience process will recycle and clean the water used for the washing process to a level,
where accumulation of e.g. salts are prevented. The cleaning of water is taking place in the waste water
treatment (WWT-plant, part of a separate tender — referred to as Lot 4), however for the 2D treatment it is relevant to inform
that the washing process will take place using ‘dirty water’ (cleaned process water from the WWT-plant) in the beginning of the process and fresh
water at the end of the 2D washing process.
Regarding 2.5) 3D Treatment.
The delivery will consist of all electro mechanical equipment required for a proper cleaning of 3D materials made
out of plastic and metals. The metal 3D-fraction is to separated from the remaining 3D fraction. The remaining
3D materials will consist of plastic, which is to be washed to a specific level of cleanliness. The 3D
materials (plastic and metals) are to be stored at appropriate storage facilities (outside scope of this Lot).
Options.
Following items are expected to be tendered as an option:
— Gas fired boiler or Heat pump for supply of process heat;
— Compressed air supply;
— Cleaning system;
— Service and maintenance contract.;
— Inert separation step (ref. sub-process 2.3 above);
— A 3rd reactor line incl. all required systems.
Justification for tendering the contract as a single contract, can be substantiated by addressing the three criteria that should be taken into account when contracts
are tendered as 1 tender in Netherlands (Lot 2 is only a part of the RSC Cure NL project, which is being tendered in
several lots):
A) The composition of the relevant market and the influence of the combination of the contacts on the access to
the contract for a sufficient number of (smaller and mid-sized) companies in that market:
— DONG Energy sets out no specific requirements to the financial capabilities of the applicant, whereas DONG
Energy also urge SME's to apply for Pre-Qualification. It is allowed for smaller and mid-sized companies to
form consortia, which will help them comply with the requirements to provide guarantees and bonds, as will be
prescribed in the commercial conditions of the contract.
B) The organisational consequences and risks of the combination of the contracts for the contracting entity and
the tenderers:
— Each of the mentioned processes, represent multiple cross-process related interfaces, relations, and exchange
of signals. Managing and controlling these — if tendered as separate lots — would be possible, however the
technical risk profile for the project execution would increase significantly, and the only way to mitigate this risk,
is to set out high requirements to resource allocation within the DONG Energy organization.
— In the project execution phase, due to the technical complexity and the overlap of the various processes,
systems and hardware, it would be extremely challenging coordinating the erection-, and commissioning phase.
Some processes/systems are physically located on top of each other, and some are statically, and process wise
dependent, whereas the time schedule would be affected, due to a significantly extended time for completion.
C) The extent of connectedness of the contracts.
— The processes represent an interconnected integrated waste handling system, comprising various complex
mechanical-, electrical-, control- and monitoring interfaces, whereas the respective processes cannot be seen
as a separate single standing systems.
— If — hypothetically — the above mentioned processes were tendered as separate packages, the requirements
for the process and media control at each interface would be unrealistically high. Each interface would require
a fixed definition on media data, process parameters, monitoring, etc. This would cause an immediate impact
on the project complexity and CAPEX, as the potential suppliers either would decline applying for the PQ, or
alternatively increase the price capitalized by the risk, which potentially could compromise the project business
case.
Basically, tendering Lot 2 as one integrated system, is based on the fact that the scope is considered the core
of the facility, where interfaces between sub-systems are crucial. It is important for the Contracting Entity to
have clear system and process responsibility both in terms of responsibility of functionality during the contract
and in terms of time during the construction phase. This can be ensured with a single contractor. Further, the
innovative nature of the core of the facility supports that the contract can be tendered as a single contract. The
Contracting entity consider the scope of the contract as being a single contract from a process, market and risk
perspective.
General info:
Potential suppliers shall expect an explicit requirement from DONG Energy in relation to the system robustness
and high degree of availability. Further specific requirements in relation to guarantees for the functionality, the
power consumption, and warrantee period relevant for this sort of equipment will apply. Specific demands for
guarantees, bonds and warrantees will be specified in the Call for Tender Material.

Deadline
Fristen for modtagelse af bud var på 2016-02-08. Indkøbet blev offentliggjort på 2016-01-22.

Hvem?

Hvad?

Hvor?
  • • Noord-Brabant › Zuidoost-Noord-Brabant

Indkøbshistorik
Dato Dokument
2016-01-22 Udbudsbekendtgørelse
2016-02-05 Supplerende oplysninger
2017-06-12 Bekendtgørelse om indgåede kontrakter
Bekendtgørelse om indgåede kontrakter (2017-06-12)
Ordregivende myndighed
Navn og adresser
Navn: Cure DONG Energy REnescience B.V.
Nationalt registreringsnummer: NL 64 05 54 77
Postadresse: Weena 2901
Postby: Rotterdam
Postnummer: 3012NJ
Land: Nederlandene 🇳🇱
Kontaktperson: DONG Energy Thermal Power A/S
Telefon: +45 99556866 📞
E-mail: sistr@dongenergy.dk 📧
Region: Midden-Noord-Brabant 🏙️
URL: http://www.dongenergy.com 🌏

Objekt
Omfanget af udbuddet
Titel: RSC Cure NL LOT 2 — January 2016. RSC Cure NL LOT 2 - January 2016
Produkter/tjenester: Opstilling af metalkonstruktioner 📦
Kort beskrivelse:
“Cure DONG Energy REnescience B.V. has decided to establish a plant for a complete handling of unsorted household waste (Municipal Solid Waste — MSW). DONG...”    Vis mere

1️⃣
Yderligere produkter/tjenester: Stålkonstruktionsarbejder 📦
Yderligere produkter/tjenester: Samling og opførelse af præfabrikerede bygværker 📦
Yderligere produkter/tjenester: Bygge-anlægsarbejde: vandrensningsanlæg 📦
Yderligere produkter/tjenester: Bygge- og anlægsarbejde i forbindelse med kemiske fabrikker 📦
Yderligere produkter/tjenester: Maskiner til rensning, påfyldning, pakning eller emballering af flasker eller andre beholdere 📦
Yderligere produkter/tjenester: Maskiner til rensning af flasker, pakkemaskiner og vejeindretninger samt sprøjteapparater 📦
Yderligere produkter/tjenester: Apparater til destillation, filtrering eller rektifikation 📦
Yderligere produkter/tjenester: Doseringsanlæg 📦
Yderligere produkter/tjenester: Spildevandsrensningsudstyr 📦
Yderligere produkter/tjenester: Slampressere 📦
Yderligere produkter/tjenester: Skrabere 📦
Yderligere produkter/tjenester: Spildevandsfiltre 📦
Yderligere produkter/tjenester: Udskillere 📦
Yderligere produkter/tjenester: Bundfældningstanke 📦
Yderligere produkter/tjenester: Ingeniørmæssig projektering 📦
Yderligere produkter/tjenester: Ingeniørvirksomhed 📦
Sted for udførelsen: Zuidoost-Noord-Brabant 🏙️
Hovedsted eller sted for udførelsen:
“Bedrijventerrein GDC Eindhoven-Acht Achtseweg Noord (Woensel A4462 en A4465) 5651 GG Eindhoven Holland.”
Beskrivelse af udbuddet:
“The REnescience core process internal referred to as LOT 2, which consists of following main processes: 2.1 Waste inlet handling. 2.2 The REnescience...”    Vis mere
Oplysninger om valgmuligheder
Indstillinger
Beskrivelse af mulighederne:
“— Gas fired boiler or Heat pump for supply of process heat. — Compressed air supply. — Cleaning system. — Service and maintenance contract. — Inert...”    Vis mere

Procedure
Type af procedure
Forhandlet procedure med forudgående indkaldelse af konkurrencer
Administrative oplysninger
Tidligere offentliggørelse vedrørende denne procedure: 2016/S 018-028476

Tildeling af kontrakt

1️⃣
Kontraktnummer: 1
Partiets identifikationsnummer: 1
Titel: RSC Cure NL LOT 2 — January 2016
Dato for indgåelse af kontrakten: 2017-05-26 📅
Oplysninger om underleverandørvirksomhed
Kontrakten vil sandsynligvis blive givet i underentreprise

Supplerende oplysninger
Yderligere oplysninger

“The contract has been tendered according to Directive 2004/17 EC, Contract Notice 2016/S 018-028476 and is expected to commence in December 2017 with a...”    Vis mere
Gennemgå organ
Navn: District Court of Amsterdam
Postby: Amsterdam
Land: Nederlandene 🇳🇱
Gennemgangsprocedure
Præcise oplysninger om fristerne for gennemgangsprocedurer:
“The contracting entity directly notified all tenderers of the award decision and the period for submitting complaints against that decision (indicated in...”    Vis mere
Tjeneste, hvorfra der kan indhentes oplysninger om klageproceduren
Navn: District Court of Amsterdam
Postby: Amsterdam
Land: Nederlandene 🇳🇱
Kilde: OJS 2017/S 111-223940 (2017-06-12)