Replacement and commissioning of super- and reheater parts of the boiler of Studstrup 400 MW Power station

DONG Energy Thermal Power A/S

This prequalification notice concerns erection and commissioning of superheater, reheater, primary and secondary boxes. The works includes dismantling of existing heaters. All pressure parts material are supplied by others.

Deadline

Fristen for modtagelse af bud var på 2013-08-23. Indkøbet blev offentliggjort på 2013-07-07.

Hvem?

• DONG Energy Thermal Power A/S

Hvad?

• Kedelinstallationer › Dampgeneratorer
• Kedelinstallationer › Dampkedler
• Radiatorer og kedler › Kedler
• Reparation og vedligeholdelse af ikke-elektrisk maskineri › Reparation og vedligeholdelse af kedler

Hvor?

• Midtjylland › Østjylland

Indkøbshistorik

Dato	Dokument
2013-07-07	Udbudsbekendtgørelse

Udbudsbekendtgørelse (2013-07-07)
Objekt
Omfanget af udbuddet
Titel: Reparation og vedligeholdelse af kedler
Mængde eller omfang:

Superheater replacement with special austenitic fine grained steelOH3 and OH4 app 34 000m tube length.Reheater replacement with special austenitic fine grained steelRH part 4 and 5 app 20 000 m tube length.Primary and secondary boxes replaced with boxes in P91 steel app. 20ton.Number of welding in total is roughly estimated to 8-10.000.

Bekendtgørelsens metadata
Originalsprog: engelsk 🗣️
Dokumenttype: Udbudsbekendtgørelse
Kontraktens art: Tjenesteydelser
Forordning: Den Europæiske Union, med deltagelse af GPA-lande
Fælles glossar for offentlige kontrakter (CPV)
Kode: Reparation og vedligeholdelse af kedler 📦

Procedure
Procedureform: Udbud efter forhandling
Bud-type: Indsendelse gældende for alle delaftaler
Kriterier for tildeling
Det økonomisk mest fordelagtige bud

Ordregivende myndighed
Identitet
Land: Danmark 🇩🇰
Type af ordregivende myndighed: Forsyningsvirksomhed
Navn på ordregivende myndighed: DONG Energy Thermal Power A/S
Postadresse: Kraftværksvej 53
Postnummer: 7000
Postby: Fredericia
Kontakt
Internetadresse: http://www.dongenergy.dk 🌏
E-mail: jenvo@dongenergy.dk 📧
Telefon: +45 99558771 📞

Reference
Datoer
Afsendelsesdato: 2013-07-07 📅
Tilbudsfrist: 2013-08-23 📅
Offentliggørelsesdato: 2013-07-10 📅
Identifikatorer
Bekendtgørelsesnummer: 2013/S 132-229324
EUT-S-nummer: 132
Yderligere oplysninger

This notice is a call for prequalification. In order to be prequalified, it is important that all information requested under III.2) Conditions for participation, is included in the request. The request to participate in the prequalification shall be submitted by E-mail to the contact point mentioned in I.1). Further specifications or additional documents to this contract notice are not available at the contact point given in I.1). When the prequalification procedure is finalized, a maximum of three(3) to five(5) prequalified companies will be invited to submit a tender. Starting (expected contract signature): 20.12.2013. Erection at site shall take place in the period app. 1.4.2014 – 30.8.2014 (details will be stated in the tender documents).

Objekt
Omfanget af udbuddet
Tjenesteydelseskategori: 1
Kort beskrivelse:

Der accepteres varianter ✅
Mængde eller omfang:

Superheater replacement with special austenitic fine grained steel

OH3 and OH4 app 34 000m tube length.

Reheater replacement with special austenitic fine grained steel

RH part 4 and 5 app 20 000 m tube length.

Primary and secondary boxes replaced with boxes in P91 steel app. 20ton.

Number of welding in total is roughly estimated to 8-10.000.

Beskrivelse af mulighederne: Will be stated in tender invitation documents
Referencenummer: 2-00365-M-24
Sted for udførelsen
Hovedsted eller sted for udførelsen:

DONG Energy Thermal Power A/S

Studstrupværket

Ny Studstrupvej 14

DK-8541 Skødstrup

Juridiske, økonomiske, finansielle og tekniske oplysninger
Betingelser for deltagelse
Egnethed til at udøve det erhverv:

A1. Documentation of the registration in the trade registration in the country of domicile.

A2. Documentation of the companies ownership and corporate form. If the applicant is a subsidiary, the name and address of the parent company must be stated as well as any information on the name and address of a Danish representative.

Økonomisk og finansiel stilling:

B1. Name and address of the applicant's bank.

B2. Annual accounts for the previous 3 years and if 50 % (or more) of the company is owned by another company, the same information is desired concerning the parent company. The accounting information shall include net turnover, result of primary operations, result after taxation, balance sheet total, equity ratio (equity capital as percentage of the total assets).

B4. If the application is based on other companies economic and financial capacity it is recommended to enclose a statement proving that these companies ressources are available to the applicant fullfilling his obligations in this contract, i.e. a parant company guarantee.

Teknisk og faglig kompetence:

C1. Documentation of the applicants quality management system is required. If the applicant is eg. ISO 9001 certified a copy of the certificate can be used as documentation. If a non-certified system is utilized it is required that the applicant describes:

a) the executive policy of the company concerning quality management - including name and position of the person who is responsible for the quality management in the company,

b) the system for document control in the company,

c) how the company assures that systems, procedures and/or working procedures are monitored,

d) how the company works to prevent and correct actions to diminish deviations from systems, procedures and/or working procedures,

e) how the company evaluates its quality management system,

f) the company's program for instructing employees in quality management and initiatives to secure the employees ability to carry out the job,

g) how the administration of sub-supplier is conducted.

C2. Documentation of the applicants health and safety management system is required. If the applicant is eg. OHSAS 18001 certified a copy of the certificate can be used as documentation. If a non-certified system is utilized it is required that the applicant describes:

a) the executive policy of the company concerning health and safety management - including name and position of the person who is responsible for the health and safety management in the company,

b) how the company assures that systems, procedures and/or working procedures to follow up on unwanted incidents are monitored,

c) how the company evaluates its health and safety management system,

d) how the company works to improve the working environment,

e) how the company has learned from cases where injunctions has been written out or fines has been received for breaking the health and safety legislation,

f) how the applicant assures that sub-suppliers comply with the health and safety legislation etc.

C3. Documentation of the applicants environmental management system is required. If the applicant is ISO 14001 certified a copy of the certificate can be used as documentation. If a non-certified system is utilized it is required that the applicant:

a) describes the executive policy of the company concerning environmental management - including name and position of the person who is responsible for the environmental management in the company,

c) how the company evaluates its environmental management system,

d) how the company works to reduce its impacts on the environment,

e) how the company has learned from cases where injunctions has been written out or fines has been received for offence of the environmental legislation.

C4. Statement of the applicant's facilities for planning and management of the works.

C5. Statement of the applicant's capacity with respect to tools and machinery.

C6. References of similar installations, which the applicant has on order or has delivered within the last 10 years in Europe. The list of references shall include information for contact to owners of referred systems (name, address, telephone number etc.) and extent of work (disciplines involved, duration, place and value of contract).

C7. If the application is based on other companies technical capacity it is recommended to enclose a statement proving that these companies ressources are available to the applicant fullfilling his obligations in this contract.

C8. Documentation of experience with welding in 9-12 % Cr martensitic steels and dissimilar welds between ferritic/martensitic steels and austenitic steels.

Kontraktens udførelse
Krav om deponering og sikkerhedsstillelse: The terms will be stated in the tender invitation documents.
De vigtigste finansieringsbetingelser og betalingsordninger og/eller henvisning til de relevante bestemmelser, der regulerer dem: The terms will be stated in the tender invitation documents.
Den juridiske form, som den sammenslutning af økonomiske aktører, der skal have kontrakten, skal have:

If several companies submit offer in a consortium, joint venture etc., the tender must be submitted jointly by the companies, who must assume joint and several liability for the tender submission and during the performance of the contract. One of the consortium/joint venture members must have full procuration to the entity.

Procedure
Sprog
Sprog: dansk 🗣️
engelsk 🗣️

Ordregivende myndighed
Identitet
Nationalt registreringsnummer: Dk
Kontakt
Enhed: DONG Energy Thermal Power A/S
Jens Vollertzen
E-mail: kfst@kfst.dk 📧

Reference
Datoer
Startdato: 2014-01-02 📅
Slutdato: 2014-11-30 📅

Supplerende oplysninger
Gennemgå organ
Navn: Klagenævnet for Udbud
Postadresse: Dahlerups Pakhus Langelinie Allé 17
Postby: København Ø
Postnummer: DK-2100
Land: Danmark 🇩🇰
E-mail: klfu@erst.dk 📧
Telefon: +45 33291000 📞
Internetadresse: www.klfu.dk 🌏
Navn: There are non in Denmark
Oplysninger om frister for klageprocedurer:

The deadlines are provided in Danish act no. 511 of 27 May 2013 on enforcement of the public procurement rules, etc (only available in Danish).

Complaints about not having been prequalified must be filed within 20 calendar days from the day after the day when the contracting entity has notified the applicants in question about the result of the prequalification provided that the notification contains a short statement of relevant reasoning behind the decision.

The complainant must notify the contracting entity in writing of the filing of a complaint with Klagenævnet for Udbud (the Review Board for public procurement) at the latest when he files the complaint with Klagenævnet for Udbud, and the notification must contain information about whether the complaint is filed in the standstill period.

If the complaint is not filed in the standstill period, the complainant must also state if it is requested that the complaint be granted suspensory effect.

Tjeneste, hvorfra der kan indhentes oplysninger om klageproceduren
Navn: Konkurrence- og Forbrugerstyrelsen
Postadresse: Carl Jacobsens Vej 35
Postby: Valby
Postnummer: DK-2500
Telefon: +45 41715000 📞
Internetadresse: www.kfst.dk 🌏
Kilde: OJS 2013/S 132-229324 (2013-07-07)

Nye indkøb inden for beslægtede kategorier 🆕

Reparations- og vedligeholdelsestjenester (16 nye indkøb)

Reparation og vedligeholdelse af pumper, ventiler, haner, metalbeholdere og maskiner (3)

Reparation og vedligeholdelse af maskiner

Reparation og vedligeholdelse af ikke-elektrisk maskineri